FREE TECHNICAL GUIDE

One setpoint.
Up to 15% plant energy savings.

Most chilled water plants control condenser water temperature using static rules of thumb. This guide explains why the optimal setpoint is constantly moving, and how dynamic optimization captures saving conventional control strategies miss.

Chart showing total chilled water plant power versus condenser water setpoint, forming a U-shaped curve with a single optimum point

FREE PDF GUIDE

Download the Technical Guide

10-page deep dive into cooling tower design and dynamic setpoint optimization.

Free · No spam · Instant access

Trusted by

Client logoClient logoClient logoClient logoClient logoClient logoClient logoClient logoClient logoClient logoClient logo
Client logoClient logoClient logoClient logoClient logoClient logoClient logoClient logoClient logoClient logoClient logo
THE INSIGHT

The optimal setpoint is a moving target

A fixed rule of thumb gets close for part of the year. The rest of the time, it
quietly leaves savings on the floor. Three reasons why.

98%
Built for a day it never sees
Plants are sized for the worst afternoon ofthe year. For the other 98% of hours theyhave spare capacity, and free savingsavailable, if the setpoint follows theconditions.
2
Two coupled energy users
Colder water makes the chillers draw lessbut the tower fans draw more. The trueoptimum is the bottom of the combinedbowl, not either curve alone.
1
A rule of thumb sees one input
Wet-bulb plus a fixed offset is blind to load,chiller type, part load and staging, the verythings that move the optimum from hour tohour.
Exergenics logo on the cover of the Condenser Water Setpoint Guide

Why the condenser water setpoint is such a hard problem

TECHNICAL GUIDE
WHAT'S INSIDE

A 10-page technical walkthrough

From cooling tower design to the physics of a dynamic reset, written for
engineers.
01.
A plant built for a day it never sees
03.
It is a chain, not a tower
05.
Add the curves, and you get a bowl
07.
Solve once. Run the answer forever.
02.
The constant-approach rule of thumb
04.
Two opposing levers: fans vs. lift
06.
The optimum never sits still
+
Real design specs & verified savings

Stop leaving savings on the floor.

Get the technical guide and see exactly where conventional
control strategies fall short, and how much is recoverable.

No Black Box.  No Training.  No Security Issues.
Free · PDF · ~10 min read
Download the Technical Guide