Services / Retrofit Analysis
Simulation study, priced per study
Candidate chillers, towers, pumps and drives simulated across the whole part-load envelope, inside the plant they will run in, on your load and your weather. Lifecycle cost with a confidence band.
Every machine has its own efficiency profile, and each depends on what the others are doing. The machine learning layer fits the operational efficiency profile of every chiller, pump and cooling tower to the site’s own trend data, across the full part-load and lift envelope: thousands of measured operating points per machine, not four rating points.
Candidate equipment is then run through that same calibrated plant model, on the site’s own load and weather, so each option is judged by how it would perform inside the plant it will actually run in.
Candidate machines run across the whole part-load envelope on the site’s own load and weather.
Tower options simulated inside the same plant model as the chillers they serve.
Pump options simulated as part of the whole plant, not in isolation.
The effect of adding drives simulated across every load, weather and stage the plant will see.
Each option is costed over twenty years, with Monte Carlo uncertainty on energy price, grid intensity and load. The result is a lifecycle cost with a confidence band rather than a single number.
Pair it with Lifetime Emissions to see whole-of-life tCO₂e and the marginal abatement cost of each option, including refrigerant emissions and low-GWP trade-offs.
Full Optimization includes the what-if analyzer: the simulation engine for equipment replacement and fault fallback, built on the same calibrated twin that drives your control strategy.
Candidate machines are simulated across the whole part-load envelope, inside your plant, on your load and your weather, rather than compared on rating points.
A twenty-year lifecycle cost per option, with Monte Carlo uncertainty on energy price, grid intensity and load.
Per study, scoped from the same calibrated model. Contact us to scope one.
A desktop forecast from your plant’s own BMS data: data gap analysis, a plant health check and a Plant Potential business case.
Priced per kilowatt of refrigeration (kWr) of installed plant capacity. Request a price list